Strut Channel & Fittings (CTM-SC) is a strut channel & fittings from Cable Tray Master.
Strut Channel · One-stop supply
The support framing that carries the whole run
Slotted and plain support channel with the full family of brackets, beam clamps, channel nuts and threaded rod, so the tray, conduit and pipe in your project are all carried on one bolt-together system. Supplied alongside our cable tray range.
- Full fitting family — brackets, clamps, nuts, rod
- Pre-galvanized, hot-dip galvanized or stainless
- Supplied with our cable tray, one shipment
We reply within one business day with sizes, finish options, price and lead time.
Why Cable Tray Master
A manufacturer you can buy direct from, and audit
Cable Tray Master is a cable tray manufacturer and exporter under one owner. We make the tray on our own line in China and ship it with our own export team, so the price is factory-direct, the specification is made to order, and buyers are welcome to visit and audit the plant.
A complete support system
Strut channel is only as useful as its fittings. We supply the channel with the brackets, beam clamps, channel nuts, threaded rod and end caps that bolt it to the structure and to your tray or conduit, so the framing goes up without site welding.
Finish for the environment
Pre-galvanized for dry indoor plant, hot-dip galvanized for outdoor and damp runs, and stainless for corrosive and coastal sites, matched to where the cable tray it carries is installed.
One contact for the whole run
Buying the support channel from the same supplier as the tray, conduit and boxes means one quote, one order and one shipment for the containment and its framing.
What the CTM-SC is, and who it is for
Strut channel, also known as support or mounting channel, is the cold-formed steel backbone that holds a services run in place. A C-shaped channel with an inturned lip lets a channel nut drop in and lock, so brackets, clamps and threaded rod bolt up anywhere along its length without drilling a fresh hole or welding on site. It is what a cable tray, a bank of conduit or a run of pipe actually hangs from.
We supply the channel in the common 41 mm sections, slotted or plain and single or back-to-back, with the full family of fittings: flat and angle brackets, beam and girder clamps, channel nuts, threaded rod, spring nuts and end caps. Finishes run from pre-galvanized for dry indoor plant to hot-dip galvanized and stainless for outdoor, damp and corrosive sites, so the support matches the tray it carries. Sections, gauge and finish are confirmed per order.
Specifications
Technical specifications
Confirmed per order. We send the full spec sheet, including sizes, thickness and finish, before you buy.
| Type | Cold-formed support (strut) channel |
|---|---|
| Common sections | 41 × 41 mm / 41 × 21 mm (typical, confirm per order) |
| Slotting | Slotted or plain, single or back-to-back |
| Material | Cold-rolled steel (stainless on request) |
| Surface Finish | Pre-galvanized / hot-dip galvanized / stainless |
| Fittings | Brackets, beam clamps, channel nuts, threaded rod, end caps |
| Certification | Product-specific, available on request |
| Origin | Made in China |
| MOQ | Confirm on inquiry |
Sections, gauges, finishes and any product-specific certifications are confirmed per order and per market. This line is described in standard industry terms; our cable tray CE and UL certificates do not apply to it. Request the full specification before ordering.
Built to do the job on site
Drop-in channel nuts
The inturned lip lets a channel nut lock anywhere along the run, so fittings bolt up without drilling or welding on site.
Finish to match the tray
Pre-galvanized, hot-dip galvanized or stainless, chosen for the same environment as the cable tray it supports.
Slotted or plain, single or back-to-back
Common 41 mm sections in slotted or plain, and doubled back-to-back where the span or load needs a stiffer member.
Full fitting family
Brackets, beam clamps, channel nuts, threaded rod and end caps supplied together so the framing goes up as one system.
Sourcing & Trust
Where this tray comes from, in plain terms
We would rather tell you exactly what we are than dress it up. Here is the honest picture of who makes the tray and what we can document.
One-stop electrical supply
We supply strut channel alongside our own cable tray range, so buyers can source tray, support channel, conduit, boxes and covers from one contact and one shipment instead of chasing separate suppliers.
Sections and certifications on request
Channel sections, gauges, finishes and any product-specific certifications are confirmed per order and per destination market. Tell us the standard your project requires and we share what applies.
Export-experienced packing
Packed and crated for the container the same way we already ship our cable tray orders overseas, with international shipping marks.
Strut channel is part of our one-stop electrical infrastructure range. We describe it in standard industry terms and confirm exact sections, finishes and any product-specific certifications with you before order. Our cable tray CE and UL certificates do not apply to this product line.
Downloads
Catalogue, datasheet and guides
Everything your buying team needs to spec and quote the tray. Ask us for anything not yet posted and we will send it the same day.
Full Product Catalogue
The complete Cable Tray Master range, cable management and electrical infrastructure.
Request a copyFrequently Asked Questions
What strut channel sections do you supply?
Do you supply the fittings as well as the channel?
What finishes are available?
Is the strut channel certified?
Get a quote for CTM-SC
Tell us the width, finish, quantity and destination. We reply within one business day with the section, price and lead time.